• Destroys algae and prevents their reappearance
• Ideal for rough waters (swimming against the current, etc.)
FEATURES
• Does not contain copper
• High average active ingredient content
• Pronounced clarifying effect
• Compatible (in solution) with the PHMB system
• Recommended in combination with oxidants (synergy)
• Non-foaming at recommended dosages
• Suitable for very rough waters
• Does not modify the pH of the water
• Compatible with all filtration equipment
• Product recommended for the treatment of very rough water: slides, swimming against the current, spas, jets...
ANTI-ALGAE KLERAL 1L - HTH
Instructions for use
Precautions for use
Make sure the filtration is on.
Distribute the product as close as possible to the water, opposite the backflows if there are any.
• Prevention of algae development
- On commissioning: provide 200 ml for 10 m³ of water.
- Maintenance treatment - Every week: provide 100 ml for 10 m³ of water.
• Catch up green waters (healing mode)
- Provide 400 ml for 10 m³ of water.
If possible, before treatment, thoroughly brush the places where the algae are located.
If the invasion of algae is very important, carry out at the same time a chlorination-shock or a shock treatment with active oxygen.
In the event of a large number of swimmers, high temperatures or heavy rain, double the dosage.
In case of very hard water (TH > 300 mg/l), multiply the dosage by 1.5.
In curative mode, the disappearance of algae can take 24 to 48 hours.
This product can be used in preventive mode before filling: after cleaning the pool, spray the walls with the product. Insist on parts of
connection such as skimmers, chutes, bottom drains, backflows, liner joints or tiling joints. Leave to act for about an hour then proceed to
filling the basin.