• 4 actions:
1 - Disinfectant
2 - Anti-algae: fight against algae and prevent their reappearance
3 - Clarifier: clarifies the water
4 - Flocculant: improves filtration
FEATURES
• 20 gram tablet with slow dissolving, no residue
• Excellent disinfectant activity, whatever the pH of the treated water (98% at pH 7.0 and still 75% at pH 8.2)
• Lightens or even eliminates pH control
• Product "without active chlorine" therefore without production of troublesome derivatives (chloramines, stabilizer)
• Very low gaseous emissions compared to chlorine, decisive advantage for water at high temperature
• Disinfectant action
• Algaecide action
• Flocculant action
• High stabilization against the destructive action of ultraviolet rays of sunlight
• Average active ingredient content (BCDMH) close to 93%
• Average chlorine equivalent content close to 53%
• Totally free of isocyanuric acid (stabilizer)
• Can be used in hard water (high TH)
• Compatible with all filtration equipment
• Ideal product for disinfection of difficult water, in particular:- at high pH: up to 8.5.- at high temperature: up to 40°C.
• If the water temperature is below 25°C, the tablets are difficult to dissolve.
• Although this product remains disinfectant at high pH, it does not protect against the risk of scaling; it may therefore be necessary to reduce the pH in the event of high TH and/or TAC
BROMINE MULTIACTION 4 1KG - HTH
Instructions for use
Precautions for use
Note: the analysis of the bromine content requires the use of a specific kit (chlorine/pH kits are not suitable).
Make sure the filtration is on.
Adjust the pH between 7.0 and 7.6.
On commissioning and in the event of green/cloudy water:
Carry out a shock treatment using a powdered active oxygen product (see technical data sheet/corresponding label).
Maintenance treatment:
The tablets are designed to be placed in a skimmer, a brominator or a floating diffuser provided that it is suitable.
Provide 1 tablet per m3 of water every 7 to 10 days.
Adjust the supply of tablets or the injection of the doser so as to maintain, on analysis, the desired bromine content. In the absence of regulatory obligations,
we recommend maintaining a minimum bromine content of 2 mg/l (DPD 4).
Bromine analysis can be performed by replacing the DPD 4 tablet with a DPD 1 tablet followed by a DPD 3 tablet.
If a bromine dispenser is used, fill it with a maximum load of 5 kg of tablets and refill it according to erosion.
tablets.
For balanced water, maintain a full alkalimetric title (TAC) between 80 and 140 mg/l.