• Protects water during winter
• Prevents scale deposits
• Fight against algae and fungi
• Suitable for active and passive wintering
• Non-foaming
FEATURES
• Non-foaming at recommended dosages
• High average active ingredient content
• Does not contain phosphates
• Does not contain copper
• Effective regardless of the pH of the water to be treated
• Suitable for very rough waters
• Does not modify the pH of the water
• Recommended in combination with oxidants (synergy)
• Compatible with all filtration equipment
WINTERING SUPER WINTER PROTECT 3L - HTH
Instructions for use
Precautions for use
PREPARATION
Make sure the filtration is on.
Thoroughly clean the pool with a broom-venturi or broom-vacuum.
Adjust the pH between 7.0 and 7.4.
Carry out shock chlorination (see technical data sheet/corresponding label).
WINTERIZING
Close the valves corresponding to the surface suction so as to retain only the suction via the bottom drain alone.
Make sure the filtration is on.
Partially drain the basin up to the backflows.
Provide 300 ml for 10 m³ of water.
Distribute the product as close as possible to the water, opposite the outlets.
Let the filtration run for 2 hours.
Put the pool and pipes frost-free (wintering buoys and Gizzmo bottles).
Stop filtration.
If necessary, protect the filtration equipment from freezing.
In the event of a very mild winter, plan to redo a treatment mid-season.
In case of hard water (TH > 200 mg/l), multiply the dosage by 1.5.
In case of very hard water (TH > 300 mg/l), multiply the dosage by 2.
A winter cover significantly increases the protection of the pool.
• It is not recommended to overwinter as long as the water temperature remains above 15°C.
• When put back into service, a shock chlorination carried out on water wintered with this product is likely to lead to an increase in the pH and the phosphate content.