• Cleans and descales:
1. Sand and cartridge filters
2. Diatomite filter cloths
3. Salt chlorinator cells
• Tinted liquid to visualize rinsing
FEATURES
• Very easy to use thanks to its purple color
• High active ingredient content
• Very effective against lime deposits
• Excellent solvent and detergent powers
• Low smoking compared to hydrochloric acid
• Compatible with most materials used for swimming pools or spas
• The method of introducing the product upstream of the filter (skimmer, chute or pre-filter) is possible but less effective than direct introduction into the filter.
FILTERWASH CELL AND FILTER CLEANER 1L - HTH
Instructions for use
Precautions for use
SAND FILTER
Provide the following quantities:
• 1 liter to 2 liters for a filter with a diameter of less than 50 cm.
• 2 liters to 5 liters for a filter with a diameter between 50 cm and 1 m.
• 5 liters to 20 liters for a filter with a diameter between 1 m and 1.5 m.
Open the filter.
Drain the filter until the water level is at sand level.
Introduce the product directly into the filter.
Close the filter.
Leave to act for at least half a day, for example overnight.
Backwash the filter until the color disappears in the indicator light (when possible).
Rinse the filter.
DIATOMITE FILTER or CARTRIDGE FILTER
The product must be diluted in the proportion of 1 liter in 10 liters of water.
Immerse the items to be cleaned in the container containing the solution.
Leave to act for at least 2 hours.
Brush then rinse the elements.
SALT ELECTROLYZER CELLS
Dilute the product at the rate of 1 liter in 4 liters of water.
Leave the scaled electrodes to soak in the solution prepared in this way until the scale has completely disappeared (count 2 to 3 hours).
Rinse the electrodes with plenty of water until the foam disappears.
Procedure for product dilution:
1. Use a perfectly clean preparation container reserved exclusively for this purpose.
2. First, pour in the entire volume of water required.
3. While shaking gently, then slowly pour in the amount of product needed.