• Cleans the water line
• Dual action:
1. Dissolves fatty deposits
2. Removes tartar
FEATURES
• Very high viscosity permanent gel
• Maximum adhesion and efficiency on vertical walls • high active ingredient content
• Very effective against lime deposits
• Excellent solvent and detergent powers
• Revives the colors and shine of cleaned materials
• Non-abrasive
• Low foaming
• Compatible with most materials used for swimming pools or spas
• Compatible with all filtration equipment
• Some synthetic materials, other than pool or spa materials, can be cleaned with this product. Nevertheless, test the compatibility on a small inconspicuous sample surface.
• The application of this product in the presence of highly chlorinated or brominated water can cause the degradation of the treated coating.
BORKLER WATER LINE CLEANER GEL 1L - HTH
Instructions for use
Precautions for use
Make sure that the disinfectant content of the pool water is less than 4 mg/l of chlorine or 9 mg/l of bromine (depending on the type of treatment). If this is not the
case, do not use this product.
Bring a bucket of water.
Wet the surfaces to be cleaned; for the water lines, project the water from the pool onto the dry walls.
Apply pure using a natural sponge or a brush specially designed for cleaning the water line.
After use, rinse the sponge or brush well in the bucket.
Leave to act for a minimum of 5 minutes, a maximum of 1 hour.
Scrub, if necessary, very encrusted old deposits.
Rinse the water line with pool water.
For stubborn stains, repeat the operation.
The diluted product does not interfere with water treatment.
This gel is non-permanent. Prolonged shaking of the can or bucket makes it liquid. It automatically recovers its gel state after 24 hours
when left to rest.