• Cleans pipes and internal equipment
• Removes greasy deposits and soap scum
FEATURES
• Cleans the residue that has accumulated in the pipes and equipment of spas and whirlpools and which can become a source of bacteria.
• Fight against the development of biofilms.
• Improved filtration efficiency.• Ideally, the treatment should be carried out at least every 12 weeks, before emptying.
DRAIN CLEANER SPA CLEAN 1L - HTH
Instructions for use
Precautions for use
This product should only be used after ensuring that the spa no longer contains any treatment product (pH correctors, chlorine, bromine, etc.) anywhere (filter, skimmer, chlorine dispenser /bromine, floating diffuser...). If this is not the case, the pipe cleaning operation must be postponed until all the treatment products have disappeared from the spa.
Once these conditions are met:
Remove the filter cartridge.
Make sure that the water is at its normal level (at least 50 mm above the outlets).
Start up pumps and boosters.
Pour 250 ml of product into the skimmer or filter.
Open the circulation valves wide and run the pumps for at least 15 minutes.
Activate the bubblers (blowers) 5 minutes.
Stop the pumps and let the water stand for 15 minutes.
Switch pumps and boosters back on again for 15 minutes (foam may form).
Stop the pumps.
Empty the spa.
Clean the backflows and the walls using a garden hose (for persistent deposits use a spa cleaner).
Fill the spa and return to normal operating conditions.
Re-install the filter cartridge after cleaning it with filter cleaner.
Disinfect spa water (chlorine, bromine or oxygen) before reuse.
In the case of a swim spa, it may be necessary to use up to 1 liter of product.
This product cleans the residues accumulated in the pipes/equipment of the spa and which are a source of bacteria. The treatment must be carried out before each oil change and at least every 12 weeks.